Instrukcja Serwisowa jest kompletna i czytelna. Dziękuję!
Tekstowy podgląd strony 7 (kliknij aby zobaczyć)
AX-F300
4. Removal of CD Mechanical-Unit Assembly, Main P. W. Board and Motor P. W. Board
(1) Remove one each of screws and from the main P. W. board on the side. (2) Remove 2 screws from the top side of the mechanical unit. (3) Remove 2 screws from the bottom side of the chassis. (4) Remove the connectors , , and of the main P W. board. . (5) Remove the connector of the P T. P W. board. . . (6) Remove 1 screw from the top side of the P T. cover and detach the power transformer from the chassis. . (7) Remove 1 screw of the ground wire. (8) Remove the connectors , and of the motor P W. board from the main P. W. board. . (9) Remove 2 screws from the motor P. W. board. (10) Remove the solder from the four places of the soldering section of the motor. (11) Remove the connectors PG402 and 403 of the motor P W. board. .
