SHARP AYXP12FRN
Instrukcja Obsługi

BASIC OPERATION 1
Press the MODE button to select the operation mode.
AUTO HEAT COOL DRY

2
2 5

Press the ON/OFF button to start operation.
� The red OPERATION lamp ( will light. ) on the unit

3
3
DISPLAY

Press the THERMOSTAT button to set the desired temperature.
AUTO/DRY MODE
(Example: 1°C higher)

1
MODE
1h

CLEAN FAN SWING SET/C

4

� The temperature can be changed in 1°C increments within the range of 2°C higher to 2°C lower from the temperature automatically determined by the air conditioner. COOL/HEAT MODE � The temperature can be set within the range of 18 to 32°C.

C
(Example: 2°C lower)

C

4

Press the FAN button to set the desired fan speed.
AUTO SOFT LOW HIGH

� In the DRY mode, the fan speed is preset to AUTO and cannot be changed.

5

To turn off the unit, press the ON/OFF button again.
� The red OPERATION lamp ( will turn off. ) on the unit

E-8