Maintenance
English 14 Tape deck maintenance To ensure quality recording and playback of the tape deck, clean parts A, B and C shown in the diagram below, after approx. 50 hours of operation, or on average once a month. Use a cotton bud slightly moistened with alcohol or a special head cleaning �uid to clean the deck. CD player and CD handling � The lens of the CD player should never be touched! � Sudden changes in the surrounding temperature can cause condensation to form and the lens of your CD player to cloud over. Playing a CD is then not possible. Do not attempt to clean the lens but leave the set in a warm environment until the moisture evaporates. � Use only Digital Audio CDs. � Always close the CD door to keep the CD compartment dust-free.To clean, dust the compartment with a soft dry cloth. � To take a CD out of its box, press the centre spindle while lifting the CD. Always pick up the CD by the edge and replace the CD back in its box after use to avoid scratching and dust. � To clean the CD, wipe in a straight line from the centre towards the edge using a soft, lint-free cloth. Do not use cleaning agents as they may damage the disc. � Never write on a CD or attach any stickers to it.
C
B
A
1 Open the cassette door by pressing STOP�OPEN 9/. 2 Press PLAY 1 and clean the rubber pressure roller C. 3 Press PAUSE ; and clean the magnetic heads A, and also the capstan B . 4 After cleaning, press STOP�OPEN 9/. � Cleaning of the heads can also be done by playing a cleaning cassette through once.
Environmental information All unnecessary packaging material has been omitted.The packaging can be easily separated into three materials: cardboard, polystyrene and plastic. Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packing materials, exhausted batteries and old equipment.
