PHILIPS AZ1301/17B
Instrukcja Obsługi

DIGITAL TUNER
DIGITAL TUNER Tuning to radio stations
1. Adjust the POWER slider to AM or FM. � The radio station frequency, waveband are shown (See 3) 2. Press and hold SEARCH � or § until the frequency in the display starts running. � The radio automatically tunes to a station of sufficient reception. Display shows Srch during automatic tuning. 3. Repeat step 2 if necessary until you find the desired station. � To tune to a weak station, press � or § briefly and repeatedly until you have found optimal reception.

DIGITAL TUNER
Manual programming
1. Tune to your desired station (see Tuning to radio stations). 2. Press PROG to activate programming. � PROG flashes. 3. Press PRESET + / once or more to select a preset number. � Remote control (AZ1325 models only): Press PRESET + / station.

CD PLAYER
Playing a CD
This CD-player can play all kinds of Audio Discs such as CD-Recordables and CD-Rewritables. Do not try to play a CD-ROM, CDi, VCD, DVD or computer CD. 1. Adjust the POWER slider to CD. 2. Open the CD Door. � OPEN is displayed. 3. Insert a CD with the printed side facing up and close the door. � nocd if no CD inserted/ CD dirty, incorrectly inserted or damaged. � nFcd if you have inserted a non-finalized CDR(W). 4. Press 2; to start playback. 5. To pause playback press 2;. Press 2; again to resume play. � Display: flashes during pause. 6. To stop CD playback, press the 9 button. Note : CD play will also stop when: - the CD door is opened - the CD has reached the end - you select AM / FM function.

CD PLAYER
Finding a passage within a track
1. Press and hold SEARCH � or §. � The CD is played at high speed and low volume. 2. When you recognize the passage you want, release � or § to resume normal playback. Note : During a CD program or if SHUFFLE/ REPEAT active, searching is only possible within a track.

-

- once or more to select a preset

Different play modes: SHUFFLE and REPEAT
You can select and change the various play modes before or during playback, and combine the modes with PROG. (See 4) (SHUFFLE) - tracks of the entire CD/ program are played in random order (SHUFFLE REPEAT ALL) - to repeat the entire CD/ program continuously in random order (REPEAT ALL) - repeats the entire CD/ program (REPEAT) - plays the current track continuously 1. To select play mode, press MODE once or more. 2. Press 2; to start playback if in the stop position. 3. To select normal playback, press MODE repeatedly until the various modes are no longer displayed. � You can also press the 9 button to cancel your play mode.

4. Press PROG to confirm. 5. Repeat steps 1-4 to store other stations.

Note : You can erase a preset station by storing another frequency in its place.

To improve radio reception:
� For FM, extend, incline and turn the telescopic antenna. Reduce its length if the signal is too strong. � For AM , the set uses a built-in antenna. Direct this antenna by turning the whole set.

Autostore
Autostore automatically starts programming radio stations from preset 1. Available stations are programmed in order if the station with sufficient reception strength. Any previous presets e.g. manually programmed will be erased. � Press PROG for 2 seconds or more to activate autostore programming. � The display shows AUtO, PROG blinks, followed by the radio station details when stored. After all stations are stored, the first preset station will then automatically play.

Programming radio stations
You can store up to a total of 30 radio stations (20 FM and 10 AM) in the memory, manually or automatically (Autostore).

Selecting a different track
� Press SEARCH � or § once or repeatedly to select your track. � In the pause / stop position, press 2; to start playback.

To listen to a preset station
� Press the PRESET + ,- buttons once or more until the desired preset station is displayed. � Remote control : optionally, press PRESET + ,- to select your preset station.