For BC785D
The slot for installing the APCO P-25 card is located under the remote control terminal on the rear of the scanner. 1. Turn OFF the scanner. With the screwdriver included with your BC785D, take off the center screw and remove the expansion slot door.
2. Insert the APCO P-25 card with the label facing up as shown. Be sure the card is inserted into the slot all the way.
3. Inset the ribbon into the space under the card.
4. Replace the cover and tighten the screw.
5. Turn ON the scanner. To monitor APCO P-25 systems, please refer to the BC785D operating guide.
