Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 15 (kliknij aby zobaczyć)
User Manual BDH5011
7.
CONNECTING THE DISPLAY 7.1 Connecting a DVD Player
Using Component Video Input 1. Connect the green-colored (labeled as Y) jack from the DVD to the green-colored Y1-jack of the display. 2. Connect the red-colored (labeled as PR or CR) jack from the DVD to the red-colored PR1/CR1 jack of the display. 3. Connect the blue-colored (labeled as PB or CB) jack from the DVD to the blue-colored PB1/CB1 jack of the display. 4. Connect the red (R) and white (L) audio jacks from the DVD to the R and L audio-in jacks located next to the PR1/CR1 connector. Note: There are two sets of component inputs provided.You can use either set of component inputs to connect your DVD. Using S-Video Input 1. Connect the S-Video (4-pin DIN) connector from the DVD to the S-VIDEO input on the back of display. 2. Connect the red (R) and white (L) audio jacks from the DVD to the R and L audio-in jacks located next to the S-VIDEO connector.
Using Composite (AV) Video Input 1. Connect the yellow (video) connector from the DVD to the yellow VIDEO 1 input on the back of display. 2. Connect the red (R) and white (L) audio jacks from the DVD to the R and L audio-in jacks located next to the yellow VIDEO 1 connector.
