PIONEER BDP-LX71/WPWXJ2
Instrukcja Obsługi

Others
Problem The power turns off automatically. Check Is Auto Power Off set to On? Remedy If Auto Power Off is set to On, the power turns off automatically if no operation is performed for over 30 minutes (page 43). The player�s power may turn off together with the power of the connected TV. If you do not want the player�s power to turn off when the TV�s power is turned off, set HDMI Control to Off (page 42). The player�s power may turn on together with the power of the connected TV. If you do not want the player�s power to turn on when the TV�s power is turned on, set HDMI Control to Off (page 42). The inputs of the connected TV or AV system (AV receiver or amplifier, etc.) may automatically switch to the player when playback starts on the player or the menu screen (Home Media Gallery, etc.) is displayed. If you do not want the inputs of the connected TV and/or AV system (AV receiver or amplifier, etc.) to switch automatically, set HDMI Control to Off (page 42). Operate with the remote control of the device connected to the CONTROL IN terminal.

07

Is HDMI Control set to On?

The power turns on automatically.

Is HDMI Control set to On?

Inputs of connected TV and AV system, switches automatically.

Is HDMI Control set to On?

Player cannot be operated with remote control.

Is an AV receiver or amplifier connected to the CONTROL IN terminal on the player�s rear panel?

Are you operating the remote control from a point too far away Operate from within 7 m of the remote control sensor. from the player? Are the batteries dead? Settings you have made have � Have you disconnected the power cord while the player�s been cleared. power was on? � Has there been a power failure? Replace the batteries (page 5). If the power cord is disconnected or there is a power failure while the player�s power is on, the settings you have made may be cleared. Always press � STANDBY/ON on the player�s front panel or � STANDBY/ON on the remote control and check that POWER OFF has turned off from the player�s front panel display before disconnecting the power cord. Be particularly careful when the power cord is connected to the AC outlet on another device because the player turns off in conjunction with the device. We recommend plugging the power cord into a wall outlet whenever possible. When a disc on which files are recorded is inserted, depending on the number of files recorded on the disc, loading may take several dozen minutes. The characters that cannot be displayed on this player are displayed in �. Set Hybrid Disc Playback to DVD (page 43).

After a disc is inserted, Are there too many files recorded on the disc? Loading stays displayed and playback does not start. � is displayed in file names, etc. The DVD layer of BD and DVD Is Hybrid Disc Playback properly set? hybrid discs cannot be played. The CD layer of BD and CD hybrid discs cannot be played. The Hybrid Disc Playback setting cannot be changed (displayed in gray). Is Hybrid Disc Playback properly set?

Set Hybrid Disc Playback to CD (page 43).

Is a disc set in the disc tray?

The Hybrid Disc Playback setting cannot be changed when a disc is set. Remove the disc, then change the setting. The BDMV/BDAV Playback Priority setting cannot be changed when a disc is set. Remove the disc, then change the setting.

BDMV/BDAV Playback Is a disc set in the disc tray? Priority setting cannot be changed (displayed in gray).

55
En