|
|
|
Kto jest w sklepie?
Sklep przegląda 5879 gości |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
 ;
...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
;
Instrukcja Serwisowa jest kompletna i czytelna. Dziękuję!
;
Wszystko OK!
Dokumentacja jest czytelna.
Dziękuję.
;
Bardzo dobra jakość skanu, przystępna cena. Instrukcja serwisowa okazała się przydatna przy "reanimowaniu" dwudziestoparoletniego decka, który teraz pięknie gra :)
BD-V1100, BD-V1110
No.
Pin Name
I/O
Function
Power Supplies 16 18 3 12 6 9 21,22,24, 37,47,57, 68 20 19 AFE_GND AFE_VDD CH1_AGND CH2_AGND CH1_AVDD CH2_AVDD DGND DTO_AGND DTO_AVDD � � � � � � � � � � � � Analog supply. Connect to analog ground Analog supply. Connect to 5V analog. Analog grounds. Connect to analog ground Analog supply. Connect to 5V analog. Digital grounds Ground for DTO. Connect to analog ground. Supply for DTO. Connect to 5V analog. Digital supply 3.3V Substrate ground. Connect to analog ground. PLL supply connect to 3.3V A/D reference supply. Connect to 5V analog. A/D reference ground. Connect to analog ground. Active video indicator. This signal is high during the horizontal active time of the video output on the Y and UV terminals. AVID continues to toggle during vertical blanking intervals. This terminal may be placed in a high-impedance state. Odd/even field indicator or vertical lock indicator. For odd/even indicator a logic 1 indicates the odd field. For vertical lock indicator a logic 1 indicates the internal vertical processor is in locked state. Additionally, this terminal in conjunction with GLCO and PALI is used to detemine the host port mode configuration during initial power up. Horizontal sync signal. The rising edge time is programmable via host port control this terminal may be placed in a high-impedance state under host port control. PAL line indicator or horizontal lock indicator. For PAL line indicator a logic 1 indicates a noninverted line and a logic 0 indicates an inverted line. For horizontal lock indicator a logic 1 indicates the internal horizontal PLL is in a locked state. Additionally, this terminal in conjunction with GLCO and FID is used to detemine the host port mode configuration during initial power up. Vertical sync or vertical blanking signal. The function of this terminal is selected via host port control. This terminal may be placed in a high-impedance state.
34,44,54, DVDD 65,75 17 25 8 7 NSUB PLL_AVDD REFP REFM
Sync Signals 27 AVID O
33
FID
I/O
30
HSYN
O
32
PALI
I/O
29
VSYN
O
66
|
|
|
> |
|
