RADIAL BIG SHOT O
Instrukcja Obsługi

CONGRATULATIONS on your purchase of a Radial BigShot i/o. The Big-Shot i/o is a foot controllable device that allows a musician to select between two instruments on stage. The BigShot i/o can select between an electric and acoustic guitar or between a passive 4-string bass and an active-5 string bass. This is done by simply depressing a footswitch.

USING THE RADIAL BIGSHOT I/O DIM LEVEL The BigShot i/o is equipped with an innovative feature called DIM LEVEL. By engaging the DIM LEVEL control, you can reduce the level of the instrument connected to INPUT-2 so that it matches the instrument connected to INPUT1. Using the DIM LEVEL control to set a balanced level between two instruments can make transitions quick and easy without having to go to the amp and adjust the level each time. DIM LEVEL is designed primarily for situations when toggling between an instrument with passive pickups (such as a vintage Fender Precision bass) and an instrument with active pickups (such as a modern 5 string bass). The active bass will generally have much more output than the passive. The same logic applies when toggling between an electric guitar with passive pickups and an acoustic guitar with a built in preamp. The active acoustic guitar is much louder than the passive electric. By reducing the output of the more powerful instrument with the DIM LEVEL control, toggling between instruments during a hectic show is greatly simpli�ed.

FAQ Besides guitar and bass, can the BigShot i/o be used with other instruments? Yes. The BigShot i/o will work for any high impedance signal including electronic instruments like keyboards and samplers. It will also work with dynamic microphones that have a hi-Z ¼� cable. For low-Z balanced mics, use the Radial HotShot ABi device which is designed to switch mic signals. What is the advantage to turning the tuner output off? Splitting the guitar signal to feed two inputs such as the tuner and ampli�er can cause passive pickups to be loaded down. Loading will reduce the level of your guitar signal and make it sound less punchy. The BigShots tuner mute feature eliminates loading problems and has the bene�t of convenient silent tuning. Can I use the tuner output to switch between amps like an ABY switcher? Yes, but be careful! Especially with older amps that do not have safety grounds. These old amps are notorious for causing shocks! As such, we are unable to recommend this practice due to legal responsibility. Please consult a quali�ed technician should you wish to use your BigShot i/o in an application it was not intended for. I hear a slight clicking when I switch in effects. Is this normal? Yes. The BigShot i/o is passive and the click occurs as the switch makes contact. This is normal for passive devices like the i/o. The only switchers that do not click are the types that employ photocells like the Tonebone Bassbone. These units ramp up and down the signal to avoid the on-off click. What is the difference between the BigShot i/o and the Tonebone Bassbone? Both allow you to select between two instruments but the BigShot i/o is passive while the Bassbone is a preamp and employs active Class-A buffering. The BigShot i/o is designed for those that prefer a direct guitar to amp connection. The Bassbone is designed for those that need to run longer cables, insist on eliminating all switching noises and do not want to deal with loading issues. The i/o is also considerably more affordable! I have two passive instruments. Which one do I connect to INPUT-2? Even passive pickups can vary in the amount of signal they produce. Connect the �louder� of the two instruments to INPUT-2 and use the DIM LEVEL control to match levels between instruments. If necessary, the BRIGHT switch may be employed to compensate for any treble loss as a result of the DIM LEVEL control. If your instruments are identical and no level matching is needed, the DIM switch should be in its off position. I have two guitars, one going direct and another I use with a wireless. How do I connect them to the BigShot i/o? The wireless system will have a buffer, or pre-ampli�er as part of its output stage. This makes it very much like an active instrument. Connect the passive guitar to INPUT-1 for a true bypass connection to your amp. Connect the wireless to INPUT-2 and use the DIM LEVEL control to match levels between instruments.

To make the transition as simple and effective as possible, an innovative DIM LEVEL control is provided that only affects INPUT-2. This control allows the louder of the two instruments to be tamed down so that both instruments play through the same amp channel at the same relative volume. The DIM LEVEL control may be switched out of the signal path when not needed. To add versatility, a second output labeled TUNER allows a tuning device to be connected for quiet on-stage tuning. The BigShot i/o is ideally suited for any high impedance instrument such as guitars, basses and keyboards. CONNECTING THE BIGSHOT I/O The BigShot i/o is completely passive. This means that it does not require any power whatsoever to make it work. Before making any connections, con�rm your ampli�er is turned off and the volume controls are turned all the way down. This will reduce the possibility of problems should you have a short or a bad connection. Start by connecting your main guitar to INPUT-1 and your second guitar to INPUT-2. Now connect the OUTPUT to your ampli�er. If you have a tuner, you can connect it to the TUNER output. Turn your amp on and test your setup at a low volume. By depressing the SELECT footswitch, you will be able to toggle between guitars. By depressing the MUTE footswitch, you will turn off the output for silent tuning. You are now set to go!
Tuner Active instrument connects to input-2

To use the DIM LEVEL control, �rst ensure the DIM slider switch is in the on position. Next connect the louder of your two instruments to INPUT-2. Strum each guitar and use the SELECT footswitch to toggle between instruments. Adjust the DIM LEVEL control until the instrument levels match. DIM SWITCH The DIM LEVEL control would generally not be used if you are selecting between two identical guitars, such as a backup guitar. It may be switched out of the circuit using the DIM slider switch. BRIGHT SWITCH This 3 position switch is designed to counteract any effects caused by the DIM LEVEL control and therefore only effects the instrument connected to INPUT2. As the BigShot i/o is passive, introducing a potentiometer into the circuit could darken the tone in some cases. The BRIGHT switch will allow you to compensate as needed. Note that the BRIGHT switch is only available when the DIM switch is set in the on position. TUNER SWITCH The TUNER slider switch works with the MUTE footswitch and controls how the TUNER output jack behaves. In the down position, the TUNER output jack is only active when the MUTE footswitch is depressed, this also mutes the main OUTPUT for silent on-stage tuning. In the up position, the tuner output remains on at all times regardless of whether the main OUTPUT is muted or not. This allows on-the-�y tuning. MUTE FOOTSWITCH The MUTE footswitch on the BigShot i/o always turns off the main OUTPUT jack and stops your guitar signal from reaching the ampli�er. SELECT FOOTSWITCH The SELECT footswitch determines which input jack is active and toggles between them.

Passive instrument connects to input-1

Radial Engineering

BigShot i/o User Guide

Radial Engineering

BigShot i/o User Guide

Radial Engineering

BigShot i/o User Guide