Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 12 (kliknij aby zobaczyć)
1-4. Location and Function of Switches/LEDs
![ S12 : SCH adjust switches Used to adjust the SCH phase. When you set a switch to ON, the phase will shift by the amount corresponding to the switch shown in the following table. If you set two or more switches to ON, the phase will shift by the total amount of the corresponding switches.
Switch No. S12-1 S12-2 S12-3 S12-4 S12-5 S12-6 S12-7 S12-8 S12-9 S12-10 Amount of the adjustment (�) 0.35 0.70 1.41 2.81 5.63 11.3 22.5 45.0 90.0 180.0
Factory setting: S12-4, -5, -9, -10 ; ON S12-1, -2, -3, -6, -7, -8 ; OFF !] S13:Q-FILTER (Q filter ON/OFF) switch Selected the Q filter of output video signal. ON : Set the Q filter to 0.5 MHz. OFF : Set the Q filter to 1.5 MHz(same as I axis). Factory setting: ON !\ S1: Free-running adj. switch Factory setting: OFF