Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 10 (kliknij aby zobaczyć)
To operate air conditioner with remote control
To select the fan speed (in Cool, Fan Only or Power Saver mode only):
Press TURBO, HIGH or LOW.
To raise the temperature:
Press the plus button. Room indicator light on air conditioner will turn off and Set indicator light on air conditioner will turn on. Display on air conditioner shows the Temperature control setting. Each time you press or hold the plus button, the temperature will increase 1º until it reaches 86°F (30ºC). NOTE: After 3 seconds, Set indicator light on air conditioner will turn off and Room indicator light on air conditioner will turn on. Display on air conditioner will show the current room temperature.
To lower the temperature:
Press the minus button. Room indicator light on air conditioner will turn off and Set indicator light on air conditioner will turn on. Display on air conditioner shows the Temperature control setting. Each time you press or hold the minus button, the temperature will decrease 1º until it reaches 64°F (18ºC). NOTE: After 3 seconds, Set indicator light on air conditioner will turn off and Room indicator light on air conditioner will turn on. Display on air conditioner will show the current room temperature.
NOTE: Two AA batteries (not included) power the remote control. Replace batteries after 6 months of use, or when the remote control starts to lose power.
To turn the air conditioner on or off:
Press POWER.
To set the Timer for a 1- to 24-hour delay until the air conditioner turns off (the air conditioner must be On): To select the mode:
Press AUTO COOL, COOL, FAN ONLY, or POWER SAVER. s Auto Cool�fan speed is adjusted automatically.
s
1. Press TIMER. Timer indicator light on air conditioner will flash. Hour indicator light will turn on and display will show remaining hours before air conditioner will turn off.
Cool, Fan Only or Power Saver�you can adjust the fan speed.
2. Press the plus or minus button to change delay time (1 to 24 hours). 3. Press TIMER again or wait 10 seconds. Timer indicator light on air conditioner will remain on. Hour indicator light on air conditioner will turn off and Room indicator light on air conditioner will turn on. Display on air conditioner will show the current room temperature.
