WHIRLPOOL CA10WXP0
Instrukcja Obsługi

Timer delay To set the Timer for a 1- to 24-hour delay until the air conditioner turns off (the air conditioner must be On):
1. Press TIMER. Indicator light will flash.

To operate air conditioner with remote control

POWER ON/OFF

Auto Cool

Cool

Turbo

2. Press the plus or minus button to adjust the delay time (1 to 24 hours). 3. Press TIMER again or wait 10 seconds. Indicator light will remain on.

Fan Only FAN SPEED Power Saver

High

Low

To set the Timer to turn on the air conditioner, keeping previous settings:
1. Turn off air conditioner. 2. Press TIMER. Indicator light will flash. 3. Press the plus or minus button to change delay time (1 to 24 hours). 4. Press TIMER again or wait 10 seconds. Indicator light will remain on.

Temp / Time Timer

To set the Timer to turn on the air conditioner, changing the previous settings:
1. 2. 3. 4. Turn air conditioner on. Adjust MODE to Auto, Cool, Fan Only, or Power Saver. Adjust FAN SPEED to Turbo, High or Low. Adjust temperature between 64°F (18ºC) and 86°F (30ºC).

NOTE: Two AA batteries (not included) power the remote control. Replace batteries after 6 months of use, or when the remote control starts to lose power.

To turn the air conditioner on or off:
Press POWER ON/OFF.
POWER ON/OFF

5. Wait 3 seconds before turning off air conditioner. 6. Press TIMER. Indicator light will flash. 7. Press the plus or minus button to change delay time (1 to 24 hours). 8. Press TIMER again or wait 10 seconds. Indicator light will remain on.

To select the mode: To clear Timer delay program:
NOTE: Air conditioner can be either on or off. Press and hold TIMER for 3 seconds. Indicator light will shut off. Press AUTO COOL, COOL, FAN ONLY, or POWER SAVER. s Auto Cool - fan speed is adjusted automatically.
s s

Fan Only - fan speed is automatically set at Turbo. Cool or Power Saver - you can adjust the fan speed.
Auto Cool

To see the remaining time (in hours):
1. Press TIMER once after it has been programmed. 2. While the display is showing the remaining time, you can press the plus or minus button to increase or decrease the time.

Cool

Fan Only

Power Saver

9