Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 30 (kliknij aby zobaczyć)
Setting the Daily Timer
With this timer you can wake up to music from a CD, tape, your favorite radio program. You can set the Daily Timer whether the Unit is on or off.
Procedure For Setting the Daily Timer 1. Press TIMER/CLOCK so that �DAILY� appears on the display.
The DAILY indicator flashes on the display. � Each time you press the button, the timer setting indication changes as follows: DAILY = ON TIME (flashes) = REC = ON TIME (flashes) = Clock setting = Canceled (current source) = (back to the beginning)
Note: If the clock has not been set, even if TIMER/CLOCK is pressed you cannot select the Daily Timer.
2. Press TIMER/CLOCK again.
After �ON TIME� flashes for 2 seconds, it switches to the on-time setting display.
\
Flashing
3. Set the time you want the Unit to turn on.
Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL to adjust the hours and press SET . Then press 4 P. DOWN or ¢ P. UP to adjust the minutes and press SET.
\
� After adjusting the minutes and pressing SET, �OFF TIME� flashes for two seconds and on-time setting is completed.
4. Set the time you want the Unit to turn off.
Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL to adjust the hours and press SET. Then press 4 P. DOWN or ¢ P. UP to adjust the minutes and press SET.
\
� � When the off-time has been set, the indication on the display changes to the source selection. To select the source to be played, press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL until your choice is shown.
5. Select the source you want to listen to. To use a CD as the source:
1. Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL repeatedly until �- CD - - -� flashes on the display and press SET.
2. Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL repeatedly to select the CD disc number to be played and press SET . If you press SET without selecting a disc, the last disc played by the Unit will be used.
3. Press 4 P. DOWN or ¢ P. UP on the MULTI CONTROL repeatedly to select the CD track number to be played and press SET. If you press SET without selecting a track, playback will start from the first track on the CD.
