|
|
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
 ;
Wszystko w porządku.
Instrukcja czytelna i kompletna.
Dziękuję.
all right!
thank you.
;
Bardzo dobra instrukcja. Zawiera wszystko co potrzeba, polecam!
;
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
;
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
Using the Timers
1
Entering the timer setting mode.
Press the CLOCK/TIMER button on the Remote Control. �TIMER� appears and the Timer indicator ( up on the display. ) lights
Set the minute you want the Unit to be turned off, using the UP or DOWN (> or <) buttons.
2
Setting the ON time (Example: 10:15).
1. Press the CLOCK/TIMER button. The hour digit of the current ON time blinks on the display.
� To proceed to the next step, the OFF time must differ from the ON time.
4
Selecting the music source.
1. Press the SET button. The �TUNER� or �CD� blinks on the display. 2. Press the UP or DOWN (> or <) button to select the music source you want to listen to. The display changes as shown below. TUNER�CD�(back to the beginning)
Press the UP (>) or DOWN (> or <) button on the Remote control to set the hour you want the Unit to come on. Pressing the UP (>) button moves the time forwards and pressing the DOWN (<) button moves it backwards. Hold down the button to move the time rapidly.
5
Setting the volume level.
1. Press the SET button. The current volume setting blinks on the display. 2. Press the UP or DOWN (> or <) button to select the volume level. -:The volume level immediately before turning off the system is used. 0 to 50 :When the timer is turned on, the Volume will be automatically set to the selected level. (It is possible to fade in the sound from volume level 0 (zero) to the preset volume.)
2. Press the SET button. The minute digits of the ON time blink on the display.
Set the minute you want the Unit to come on, using the UP or DOWN button.
6
Press the SET button.
The timer setting is completed and each setting value appears on the display for two seconds in the order of ON time, OFF time, music source and volume. Then, the display returns to the display before you set the Timer. The Timer indicator ( ) remains lit.
3
Setting the OFF time (Example: 13:30).
1. Press the SET button. The hour digit of the OFF time blinks on the display.
7
Before turning off the System, prepare the music source selected in step 4.
TUNER: Tune in to the desired station. CD: Insert a CD. (Playback will start from the first track at Timer on.)
Set the hour you want the Unit to be turned off, using the UP or DOWN (> or <) button.
8
Press the % button to turn off the System.
In standby mode, you can see the Timer indicator ( ) on the display. � When the timer turns on, the Timer indicator starts blinking and the prepared source in step 7 will be played.
2. Press the SET button. The minute digits of the OFF time blink on the display.
t During setting the timer, pressing the CANCEL button will return to the previous setting step. To cancel the timer, press the CLOCK/TIMER button and then the CANCEL button. "TIMER OFF" appears and the Timer indicator ( ) goes out on the display.
22
English
|
|
|
> |
|
