JVC CA-V908T
Instrukcja Obsługi

English

5. Press SET.
The tracks to be recorded on side B appear on the display. � Each time you press the button, the tracks to be recorded on side A and side B appear on the display alternately.

6. Insert a blank or erasable cassette in Deck B.
When you want to record on both sides of a tape, press REVERSE MODE to turn Reverse mode on.

7. Press CD REC START .
The Unit plays the CD and starts recording. If the tape has not been rewound, the Unit rewinds the tape before starting to record the CD. To stop at any time while recording, press 7 STOP or REC START/STOP on the Unit (or 7 on the remote control). If 7 STOP (or 7 on the CD Player control section on the remote control) is pressed, the Cassette Deck will create a four-second blank space after the CD Player stops. If REC START/STOP (or 7 on the tape control section on the remote control) is pressed, the CD Player and Cassette Deck will stop simultaneously. To cancel Auto Edit, press PROGRAM/ RANDOM while the CD Player is stopped or press 0 on the CD Player for the disc number being recorded. Note: When making Sleep timer settings while doing Auto Edit recording, set the time so that there is enough leeway to finish the recording before the power goes out. If the time is set to about the length of the CD, the power may go out before recording finishes.

Tape to Tape Recording (Dubbing)
Recording from one tape to another is called dubbing. When dubbing tapes, make sure that the playback direction of Deck A and Deck B are the same. When you record both sides of a tape, press REVERSE MODE to turn on the Reverse Mode. It is preferable that the type of tape (Type I or Type II) you record from be the same as the type you record onto.

How to Use DUBBING �������������������
1. Press TAPE � £ , then 7 STOP. 2. Insert the source cassette you want to copy from into Deck A for playback.
Insert the cassette so that it will be played in the forward (3) direction.

3. Insert the blank or erasable cassette you want to copy onto into Deck B for recording.
Insert the cassette so that it will be recorded in the forward (3) direction.
DUBBING

4. Press DUBBING.
Deck A and Deck B start simultaneously. To stop dubbing, press 7 STOP. When dubbing, you can hear Sound Mode effects through the speakers or headphones. However, the sound is dubbed without Sound Mode effects.

38