Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 20 (kliknij aby zobaczyć)
4 - Advanced Operations
4.1 Tempo (speed) control
2 Press the + and � keys to change the key. Display and change the key change either as a percentage of the original, or in semitone steps. Follow the steps below to select either percentage or semitone key change control. Note that the KEY indicator m will show a total of the value shown in this way, together with any changes made using the slider (when percentage mode is selected).
4.2.1
Controlling the key change as a percentage
1 Press the PRESET key. Change the tempo (playback speed) using the TEMPO slider a. Change the maximum (full down) and minimum (full up) speeds by either 0% (disabled), ±8%, ±16% or ±32%. 1 Change the maximum range affected by the TEMPO slider a with repeated presses of the TEMPO key Z (0%, ±8%, ±16% and ±32%). 2 Move the slider away from the center position in order to affect the tempo (speed) and pitch of the playback. The further away from the center you move the slider, the more you affect the playback tempo and pitch. If you select the 0% option , the TEMPO slider is disabled (moving it will have no effect). The TEMPO and
KEY parts of the display show � �.
2 Select 04 KEY (KEY) using the dial or numeric keys. 3 Press the ENTER key. 4 Select + using the dial. 5 Press the ENTER key.
NOTE
Press and hold the KEY key for more than 2 seconds to reset to 0%.
4.2.2
Controlling the key change in semitone steps
1 Press the PRESET key. 2 Select 04 KEY (KEY) using the dial or numeric keys. 3 Press the ENTER key. 4 Select # by using the dial. 5 Press the ENTER key.
4.1.1
Changing only tempo (speed)
Press the KEY ORIGINAL key Y to select the �original key� mode , you can then change the playback tempo without altering the key. The KEY part of the display shows � � when the original key mode is selected. Under these circumstances, when you move the TEMPO slider, you will affect the tempo without altering the original key (pitch).
4.3
Sampling
4.2
Key (pitch) control
You can change the key (pitch) without changing the playback tempo. 1 Make sure the original key mode is off (press the KEY ORIGINAL key Y if necessary). The CD-302 provides about 10 seconds of sampling time for each deck.
