EN
Problem The icon is not blinking when the handset is placed on the base
Troubleshooting Troubleshooting of the phone
Causes � Bad battery contact � Dirty contact � Battery is full No dialling tone � No power Solution � Move the handset slightly � Clean the battery contact with a cloth moistened with alcohol � No need to charge � Check the connections. Reset the phone: unplug and plug back in the mains � Charge the batteries for at least 24 hours � Move closer to the base station � Use the line cable provided � Connect the line adaptor (when needed) to the line cord � Move closer to the base station � Move the base station at least one metre away from any electrical appliances � Register the handset to the base station � Move closer to the base station
� Batteries are empty � You are too far from the base station � Wrong line cable � Line adaptor (when needed) is not connected to the line cord Poor audio quality � You are too far from the base station � The base station is too close to electrical appliances, reinforced concrete walls or metal doorframes The icon is blinking � Handset is not registered to the base station � The handset is too far from the base station
