Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 16 (kliknij aby zobaczyć)
Radio
SOURCE TUNE BAND
g DN
f UP
SETUP
Preset buttons (1 through 6)
Radio Operation
Switching the Tuner Mode
The CDA-7876RB/CDA-7873R/TDA-7588RB/ TDA-7587R incorporates the MAX TUNE Pro for the highest quality tuner audio. Moreover, you can choose between two settings to suit your own personal sound preferences usage.
Manual Tuning
1 2
Press the SOURCE button until a radio frequency appears in the display. Press the BAND button repeatedly until the desired radio band is displayed. Each press changes the band: � FM1 � FM2 � FM3 � MW � LW
1 2
Press and hold the SETUP button for at least 3 seconds. Press the g DN or f UP button to select the "HI-FI or NORMAL or STABLE." Each press of the f UP button changes the modes as shown: � FM-LV � REG � PTY31 � HI-FI/NORMAL/STABLE � AMBER� DEMO � AUX � SCR � MUTE � BEEP � SUB � DIM �
� CDA-7873R/TDA-7587R Only
3
Press the TUNE button repeatedly until "DX SEEK" and "SEEK" disappear from the display. NOTE
The initial mode is DX SEEK.
4
Press the g DN or f UP button to move downward or upward one step respectively until the desired station frequency is displayed.
NOTE
The ST indicator appears on the display when a Stereo FM station is tuned in.
3
Press the TUNE button to switch the TUNER mode. � HI-FI � NORMAL � STABLE
NORMAL: Standard setting HI-FI: Sound quality priority setting STABLE: Noiseless priority setting
NOTES � The initial setting at the factory is "NORMAL." � If you find the sound is very noisy while listening to the tuner in the HI-FI mode, we recommend you change to the NORMAL mode.
4
When the setting is completed, press the SETUP button to return to the normal mode.
