|
|
|
Kto jest w sklepie?
Sklep przegląda 5922 gości |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Bardzo dobra jakość skanu, przystępna cena. Instrukcja serwisowa okazała się przydatna przy "reanimowaniu" dwudziestoparoletniego decka, który teraz pięknie gra :)
;
...instruction is ok.
...instrukcja jest ok.
Thanks/Dzięki
;
Documentation made available quickly and It is good quality. Thanks.
CD-C1831V
CP-C1831
STEP REMOVAL 1 Front Speaker PROCEDURE FIGURE 1. Front Panel ............ (A1) x1 9-1 2. Tip .......................... (A2) x2 3. Screw ..................... (A3) x6
CP-C1831
(A3)x2 Tweeter ø3x10mm (A3)x4 ø4x12mm
(A2)x2
Note: The Surround speakers can be easily disassembled. Therefore the disassembling method is not described. For details refer to the disassembling drawing in the Parts Guide.
Woofer
Front Panel (A1)x1 Screw Driver
Figure 9-1
REMOVING AND REINSTALLING THE MAIN PARTS
CD MECHANISM SECTION
Perform steps 1, 2, 3, 11, 12, 13, 14 and 15 of the disassembly method to remove the CD mechanism.
Loading Motor Motor PWB
How to remove the loading motor (See Fig. 9-2)
1. Remove the screws (A1) x 2 pcs., to remove the loading motor.
(A1) x2 ø2.6 x5mm
How to remove the pickup (See Fig. 9-3)
1. Remove the screws (B1) x 2 pcs., to remove the shaft (B2). 2. Remove the stop washer (B3) x 1 pc., to remove the gear (B4). 3. Remove the pickup. Note After removing the connector for the optical pickup from the connector, wrap the conductive aluminium foil around the front end of connector to protect the optical pickup from electrostatic damage. Figure 9-2
(B1) x2 ø2.6x6mm
Stop Washer (B3)x1 Pickup
Shaft (B2) x1
CD Mechanism Gear (B4) x1
Figure 9-3
�9�
|
|
|
> |
|
