Preparing to watch a DVD (DVDs)
To watch DVD video images on the TV: 1 Turn on the TV. 2 Set the TV to �AV�, �VIDEO�, etc. 3 Turn on the unit and start play.
See page 33 for playing disc.
CD-G7500DVD CP-G7500
ENGLISH
Note:
ANTENNA
S-VIDEO OUT AUDIO DIGITAL OUT
There is no audio signal supplied to the TV.
VIDEO IN
DVD/CD
FM 75 OHMS GND
H Loading a DVD (DVDs)
AM LOOP
S-VIDEO INPUT
SPAN SELECTOR
FM/AM(kHz) 50/9
RATED LINE VOLTAGE
100/10
To TV with external terminals Video cable (Supplied)
VIDEO OUT FRONT
S-Video cable (commercially available)
1 2 3 4
Press the ON/STAND-BY button to turn the power on. Press the DVD/CD button. Press the s 1 button and within 5 seconds, press the OPEN/ CLOSE button to open the disc tray 1. Place the DVD on the disc tray 1, label side up.
I Be sure to place 8 cm (3") DVD(s) in the middle of the disc positions. 12 cm (5") 8 cm (3")
5 -DISC
GHANGER
DVD MINI SYSTEM
CD-G7500DVD
/CD
D VD
VD/C D D
5
Press the OPEN/CLOSE button to close the disc tray.
Caution:
I Do not place two discs in one disc tray. I Do not play discs of special shapes (heart, octagon, etc.). It may cause malfunctions. I Do not push the disc tray whilst it is moving. I If the power fails whilst the tray is open, wait until the power is restored. I If the disc tray is stopped with force, �ER-CD20� will appear on the display for 3 seconds and the unit will not function. If this occurs, press the ON/ STAND-BY button to enter the power stand-by mode and then turn the power on again. I If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. I If a disc is damaged, dirty or loaded upside down, the disc will skip.
H Connecting to TV
Besides the supplied video cable, you can use a commercially available Svideo cable to connect your system to television equipped with an S-video input socket and enjoy viewing high-quality images on the TV screen. Be sure to turn both the system and the TV equipment off before connecting them.