Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 8 (kliknij aby zobaczyć)
BEFORE OPERATIONS: PANEL FACILITIES
! OPEN button
Press this button to open the disc compartment door. ÷ When pressed during playback, disc rotation stops before the door opens.
$ Disc compartment door
Press the OPEN button to open the door. To close the door, push gently on the front of the door. In order to prevent interference with outside sounds and to enhance operation of the jog dial, the disc compartment door is designed with a two-point locking mechanism. To close the door, press the door down firmly in the center, at the position just in front of the jog dial.
@ Jog dial (+ FWD/� REV) ] P. 11 # TEMPO control knob
The playback tempo can be changed with this knob. The center clicked position is for normal playback tempo. If you slide the knob (down) towards you (+ side), the music tempo quickens. If the knob is away from you (� side), the music tempo slows.
Display Window
1 2 3
TRACK
REMAIN
M
S
F
TEMPO
LOOP
RELOOP
AUTO CUE
MASTER T.
8
7
6
5
4
1 TRACK number display
Displays the current number of the track playing.
6 Playback address display
The elapsed playback time or remaining playback time of the track playing is roughly indicated with the full-scaled bar graph. ÷ When no disc is in the disc compartment ................................................ off ÷ When displaying elapsed playback time .............. lights up from the left side ÷ When displaying remaining playback time .............. turns off from the left side ÷ When remaining playback time is less than 30 seconds ..................................... blinks
2 Time display (REMAIN)
The elapsed playback time of the track being played or the remaining playback time of the track being played (REMAIN) is displayed in minutes (M) and seconds (S), or frames (F).
3 Playback tempo (TEMPO) display
The playback tempo adjusted with the TEMPO control knob is displayed (up to ±10% or ±16%) in steps of 0.1%.
4 MASTER T. indicator
Lights when the MASTER TEMPO function is used.
7 RELOOP indicator
Lights when loop playback is possible. The loop-in point (start point) and loop-out point (end point) are stored in memory.
5 AUTO CUE indicator
Lights when the AUTO CUE function is used.
