PIONEER CDX-P2050VS/XN/EW
Instrukcja Serwisowa

KEH-M8196ZT

7.1.3 DISASSEMBLY

- Remove the Case(not shown) - Remove the Cassette Mechanism Module(not shown) 1. Remove the four screws. 2.Remove the connector and then remove the cassette mechanism module. - Remove the Grille Assy(not shown) 1. Disengage the stopper at four locations indicated remove the grille assy.

- Remove the Heat Sink(Fig.1) Heat Sink Remove the three screws. Remove the two screws and heat sink.

Fig.1

- Remove the Main Unit(Fig.2) Remove the screw.

Unbend the tabs at two locations indicated by arrow until straight. Remove the main unit.

Main Unit

Fig.2

43