|
|
|
Kto jest w sklepie?
Sklep przegląda 5639 gości |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
...instruction is ok.
...instrukcja jest ok.
Thanks/Dzięki
;
Documentation made available quickly and It is good quality. Thanks.
Service Manual SM CE29FFV1-F
5. TECHNICAL CHARATERISTICS.
Cathode-ray tubes Tuning-system Reception channels In-Line, gun Type. Black Matrix. 29� (68 cm) True Flat, Invar Plus mask. Voltage synthesis, 100 programs in non-volatile memory, AFT, automatic, semiautomatic and manual channel-search. Band I, channels 2-4 (VHF)=E2-E4 Cable channels S1-S10 Hyperband channels S21-S41 Band III, channels 5-12 (VHF)=E5-E12 Band IV-V, channels 21-69 (UHF)=E21-E69 B/G, D/K, I, L, L' system PAL, SECAM, (NTSC 4.43, NTSC 3,58) ONLY AV Sequential selection from the controls on the set. Direct selection to any program from the remote-control device. Power-rating 2x8,9 W rms. (10% distortion) 2 of 8 �. External aerial sockets 75 �s. IEC Stereo jack 3,5mm. (with independent control) Switch on and off of CTV programmable in real time. 1 Scart connector 21 pin CENELEC standard AV, RGB and S_Video. 1 Scart connector 21 pin CENELEC standard AV, RGB 1 RCA Video input (frontal) 2 RCA Audio input (frontal) 220 � 240 VAC 50Hz 83 W (IEC 107-1) 2,1 W (Stand-by ) Improves color transitions Improves video bandwith and reduces crosscolor effect. NICAM and Stereo/Dual (A2) Pseudo Stereo. Bass boost. Actv. 3D sorround, BBE, spatial stereo
Reception system Colour system Program selection Audio Speakers Aerial Jack for headphones Clock and alarm Function Timer Function AV connectors
Power supply Consumption
CTI Comb Filter Stereo/Dual Systems Sound Effects Auto volume Clock function Alarm function Programmable over 24 hours Timer function Switch on and off are programmable aver 24 hours. TXT 1,5 Flot and list. 10 Teletext pages memory Hotel Mode It can be programmed in Hotel Mode and Rental Hotel Mode Remore ON/OFF Tis TV can be switched ON/OFF Through the blue scart connector. Options by means of Technical Service: SECAM, NTSC-M
6. Safety
It fulfils the safety requirements established in the regulation: EN 60065:98
7. EMC (Electromagnetic Compatibility)
It fulfils the EMC requirements established in the regulation: EN 55013:1990/A12:1993/A13:1996/A14:1999 EN 55020:1994/A11:1996/A13:1999/A14:1999 EN 61000-3-2:1995+A1:19998+A2:98/A14:2000 EN 61000-3-3:1995
8. Factory special mode
The factory mode is a special TV working mode intended to help in the manufacturing process and it is identified on the screen with the message �FAC�. This mode is never suited for customer use. The main differences respect to normal mode are: 1- The standby mode is always disabled. 2- The Blue-back (no sync. signal present) is disabled. 3- The customer adjustments ( volume, contrast �) work faster. 4- The timer off works but it does not change to Stand-by mode. 5- Change of programs and TV/AV swithing faster. Cancelled mute. In case of finding the TV set in Factory mode, it must be taken out of this state. To do so, enter the clock setting menu on the customer OSD and then exit. 2
|
|
|
> |
|
