2. Push the appliance against the side opposite the door hinge. The appliance is fitted with 2 brackets (C) for securing it to the side of the kitchen unit; fit these as shown in the figure.
5. Separate parts A, B, C, D as shown in the figure.
A B
A C
C D
PR266
B
D476
3. Apply joint the sealing strip as shown in figure.
6. Place guide (A) on the inside part of the furniture door, up and down as shown in the figure and mark the position of external holes. After having drilled holes, fix the guide with the screws supplied.
50mm
A
D478
20mm
PR166
4. Secure the appliance to the base with the 2 screws supplied. Fit hinge cover (D), clipping it into place.
7. Fix cover (C) on guide (A) until it clips into place.