Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 15 (kliknij aby zobaczyć)
Number Pads and Titles
1 MANUAL PROGRAMMING 3 SPEAKER VOLUME 4 KEYBEEPS 5 END OF CYCLE BEEP 6 MAGNETRON HOURS and DOOR CYCLES 7 TWO DIGIT ENTRY ENABLE 8 PREHEAT WARNINGS
Options and Description Bold = Factory Setting
ENABLE or DISABLE
Allows or prevents manual programming of oven.
HIGH, MEDIUM, LOW, or OFF
Controls oven signal volume.
ON or OFF
Controls whether pads signal when pressed.
3 SECOND TONE, 4 BEEPS (1TIME), 4 BEEPS (4TIMES), or CONTINUOUS
Determines how oven signals at end of cycle. Displays how many hours magnetron tube has operated and how many times door has been opened and closed.
ENABLE or DISABLE
Changes the number of preprogrammed pads from 00-99 to 0-9. DISABLE, ENABLE PROG, ENABLE OVEN, ENABLE BOTH DISABLE Allows or prevents preheat message in oven display. ENABLE PROGRAM shows �WRONG PREHEAT TEMP� before a cooking cycle when the preheat temperature is different than the programmed cooking cycle temperature. ENABLE OVEN shows �PREHEAT ON-WAIT� before a cooking cycle when the preheat temperature is different than the oven temperature ENABLE BOTH shows �WRONG PREHEAT TEMP� and �PREHEAT ON-WAIT� before a cooking cycle if the preheat, programmed, or oven temperatures do not match.
