HITACHI CMPAD06
Instrukcja Obsługi

After assembling, connect the stand to the floor to prevent from falling over.
� Stabilizing to the floor
� Use screws (sold separately) to attach and stabilize the stand.

�Sample use of the stabilization bolts
1. Attach the stabilization bolts that come with the plasma display. 2. Stabilize the display by connecting to a wall or standing beam with a strong cord. (Repeat the same steps in the laterally direction to stabilize the assembly to the left and right.) Use cord and hooks that are available on the market (sold separately).

1 2

� Installation coordinates for screws used to stabilize the stand to the floor
* When stabilizing the stand to the floor, use M6 with a length above 20 mm (25/32 inch). Units: mm (inch)

248(9-3/4)

485(19-3/32)

11.5(7/16)

�5�

275(10-13/16) 64(2+17/32)