Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 5 (kliknij aby zobaczyć)
Installation Method
â� Installation procedure
1 Remove the special screws (2 locations) from the
bottom of the hung on wall unit.
Warning Be sure to install the speaker at this stage. ï½¥For the installation method, refer to the speaker installation procedure in the speaker user manual.
5 Attach the wall side hardware to the wall.
Install the wall side hardware (4 locations) symmetrically on the left and right side (one at each location from the center of the ). Because the screws and bolts used to do this are different according to the wall strength and wall material, purchase suitable screws and bolts separately.
Warning Check the strength of the wall and beams before installing the display.
Special screws (M6)
2 Remove the hardware on the wall side and the
hardware on the PDP side.
Wall side hardware
PDP side hardware
3 Attach the PDP side hardware to the plasma 6 Attach the hook on the PDP side hardware to the
display.
Warning � Cover the display with a sheet or similar protective material to protect it from scratches or other damage. � Be sure to attach it on top of a flat table or similar surface. Plasma display PDP side hardware
wall side hardware.
Warning
Do not hold the speakers during the installation work.
Top side of plasma display
7 Fix the bottom of the hardware with the special
screws removed at step 1 (one on the left and one on the right).
4 Fix the plasma display to the PDP side hardware
with bolt M8 (6 locations). Usually, use the holes marked with the red triangle "�".
