Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 12 (kliknij aby zobaczyć)
GETTING TO KNOW YOUR MICROWAVE OVEN
Setting the clock
When your microwave oven is first plugged in, or after a power failure, the display will show � : �. If a time of day is not set, � : � will stay on the display until you set the clock or another function. NOTES: � You can only set the clock when the oven is not in use. � If you enter an incorrect time, three tones will sound, �Err,� then �0� will appear on the display. Re-enter the correct time. � If you touch OFF/CANCEL while setting the clock, the clock will return to the time already on the display.
Using the minute timer
Your microwave oven can be used as a kitchen timer. Use the minute timer for timing up to 99 minutes, 99 seconds.
1. Touch �0.�
TOUCH
2. Enter the time to be counted down.
TOUCH
To set time: 1. Choose the setting.
TOUCH
Example for 3 minutes
3. Start the countdown. 2. Enter the time of day.
Example for 5:30: TOUCH NOTE: At any time touch OFF/CANCEL to cancel the minute timer. TOUCH
3. Touch CLOCK/SET or START/ENTER.
TOUCH
At end of timer cycle: Five tones will sound and the display will show �End�. Two tones will sound every minute until you open the door or touch OFF/CANCEL. The display will then return to the time of day. NOTES: � The minute timer can be used to set delayed start time by following steps 1 and 2 below, then set cook time as described in the �Cooking with more than one cycle� section. � You cannot set the minute timer while using the oven.