Inserting two size AAA (R03) batteries into the remote
Preparation
� The screws for attaching the wall hanging bracket to the wall are not supplied. Be sure to purchase screws suited to the wall materials. � If the wall materials cannot support a load of 50 kg or more, be sure to reinforce the wall.
Hanging the system on the wall 1 Fix the wall hanging bracket to the wall
using 8 screws (not supplied).
Tip
When the remote no longer operates the system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of time, remove the batteries to prevent possible damage from battery leakage and corrosion.
Using the wall hanging bracket
You can hang the system on the wall using the supplied wall hanging bracket. The screws for attaching the wall hanging bracket to the wall are not supplied. When installing the bracket by yourself, be sure to use screws appropriate for the type of wall. Sony cannot take responsibility for any damages or injury due to installation.
Safety precautions
� The supplied bracket is for use with the Sony Interior Hi-Fi Component System CMT-L7HD only. Using this item for purposes other than to hang the system on the wall may result in accidents. � The component system CMT-L7HD (7.9 kg) and the wall hanging bracket (0.6 kg) have a combined weight of 8.5 kg. Therefore, for safety reasons, the bracket should be attached securely to a wall made from materials capable of supporting a load of 50 kg or more. � When you hang the system on the wall, make sure the left and right speakers are both attached or both detached. Attaching one speaker without the other may cause the system to drop and injure someone.
Note
Be sure to secure the bracket in a level position.
2 Set the speaker cord into the speaker cord
groove at the bottom of the speaker. Otherwise, the speaker cord could be damaged.
3 Attach the speakers.
Afterwards, push down on the speakers to make sure they are securely fastened to the main unit. 4 Connect the speaker cords to the SPEAKER jacks.