Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 7 (kliknij aby zobaczyć)
The grill accessory liner pan.
consists
of two black
grill grates, a grill
element
and a grill
.....
To Install
Grill
1. Before installing grill components, be certain surface controls are in the OFF position. 2. Place the grill liner pan into an empty basin pan with the opening next to the terminal block. The grill liner pan must be used since it supports the grill element. 3. Position the grill element with the terminal plug towards the terminal receptacle. Slide the element towards the receptacle until the terminal plug is completely engage r' The grill element should rest flat on the side ledges of the grill liner pan. _._ 4. Place the black grill grates on the top of the basin pan.
To Remove
Grill
1. Remove grill components once they are cool. Be sure control switches are in the OFF position. 2. To remove grill element, lift the side at the ventilation chamber until the top of the element is about 1/2 inch above the cooktop. (NOTE: Lifting the element too high while still engaged in the receptacle could damage the terminal plug.) To disengage terminal, slide away from the terminal receptacle. Lift out when fully unplugged.
Grill Covers
1. Grill covers can be used to cover the grill, when not in use, or an empty basin pan. 2. To remove the grill covers, push down on front or rear side. The opposite side will lift slightly for easy removal.
