x Using the MENU/OK button
1 Display the main MENU.
Press the MENU/OK button to display the main MENU on your screen.
MENU
Adjusting the brightness and contrast
Brightness and contrast adjustments are made using a separate BRIGHTNESS/CONTRAST menu. These settings are stored in memory for all input signals.
1 Move the joystick in any direction. 2 Select the menu you want to adjust.
Highlight the desired menu by moving the joystick towards the top to go up (M), towards the bottom to go down (m). Press the MENU/OK button to select the desired menu. The BRIGHTNESS/CONTRAST menu appears on the screen.
BR I GHTNESS / CONTRAS T
26
26
UP
MENU
2 Move the joystick m/M to adjust the brightness (
and </, to adjust the contrast (6). If no adjustments are made, the menu disappears automatically after about 3 seconds.
),
b
DOWN 3 Adjust the menu.
Move the joystick left (<) or right (,) to make the adjustment.
Adjusting the size and the centering of the picture (SIZE/CENTER)
This setting is stored in memory for the current input signal.
US
LEFT
RIGHT
1 Press the MENU/OK button.
The main MENU appears on the screen.
2 Move the joystick m/M to highlight 4 Close the menu.
Press the MENU/OK once to return to the main MENU, and twice to return to normal viewing. If no buttons are pressed, the menu closes automatically after about 30 seconds.
MENU
SIZE/CENTER
and press the MENU/OK button. The SIZE/CENTER menu appears on the screen.
3 First move the joystick m/M to select the desired
adjustment item. Then move the joystick </, to adjust the setting. Select To shift the picture to the left or right shift the picture up or down enlarge or reduce the picture width enlarge or reduce the picture height enlarge or reduce the picture width and height proportionally
Note Adjustment stops when either the horizontal or vertical size reaches its maximum or minimum value.
