SONY CRX-100E
Podręcznik Użytkownika

Ejecting the Disc
To eject the disc, press the eject button on the front panel. The tray comes out automatically.

Note: The eject button does not work if it is disabled by the software you are using. s Opening the tray manually in an emergency You can open the tray manually when it fails to come out by means of the eject button or software commands. To do this, follow the procedure below:

1 Turn off the power of your computer. 2 Insert a pointed object, such as a paper clip, into the emergency
eject hole and push.

Approx. 40 mm

After removing a disc from the drive unit, consult your dealer or qualified service personnel.

20

Operating the Drive