BEFORE YOU CALL FOR SERVICE
Check these points
does not if... operate Metal markings ceramic glass models) appear cooktop on the (select
The cooktop
� Are any house fuses blown or circuit breakers tripped? � Is the cooktop properly connected to an electric circuit in the house? The cooktop elements do not get
� Were metal pans slid across the cooktop, especially aluminum. Brown streaks and/or areas of discoloration with a metallic sheen cooktop � Were/hod appear on the ceramic glass (select models)
hot enough � Are the snrfaee controls properly- set? � Is the voltage to the house low? � Is the eool_vare bottom FLAT and not oversized?
boilovers burned into the cooktop?
� Were the bottoms of the pans clean to avoid soil transfer to the cooktop? � Was water with hard water minerals allowed to evaporate on eooktop?
The elements and/or smoke � This is normal, lliny scratches on the ceramic
emit a slight odor when first turned on
* Were correct cleaning products used to dean cooktop? (no ehlorine bleach, ammonia, rest removers, oven cleaners) Chipping of the ceramic surface (select models) glass
or abrasions appear glass cooktop
(select models) � Is the surface free of coarse particles of sugar, dust, salt, etc. before you placed the pan on the surface? � Were proper cleaning products used when cleaning the surface? � Was glass cool.rare used? � Were pans with rough bottoms used on the cooking surface?
� Was a sugar solution, plastic or aluminum foil allowed to remain on a hot eooktop surface? For further dealer assistance contact your Maytag
or call Maytag Customer Serviee: U.S. 1-800-688-9900 CANADA 1-800-688-2002
Circuit
Canadian
Breaker
Appliance Only
e
Your appliance is equipped with a circuit breaker box. The box is located either on a wall or in a cabinet next to or near the appliance. If part or all of the appliance does not operate, cheek to see if one of the breakers has tripped. Reset the breaker to the ON position. _ e
