JVC CS-VS601UF2
Instrukcja Obsługi

How to Install
1. To install the speaker in the rear tray, first determine the appropriate area in which to place it. The speakers must be installed in a place where there are spaces of at least 32 mm over the tray and at least 49 mm under the tray. ln determining the location, make sure that the bottom part of each speaker fits into the large hole in the steel plate on which the rear tray is fixed. 2. Remove the rear tray. 3. The paper pattern printed on the bottom of the packing box shows the exact shape of the area on the rear tray through which the speaker will be installed. Apply the paper pattern onto the area determined in 1. above, and trace out the shape of the area on the tray. 4. Then, cut out the marked area. 5. The next step is to wire the speakers. Be sure to connect to connect corresponding terminals, i.e. "left" to "left", "-" to" -", etc. 6. Use the tapping screw and speed nuts provided to fix the speaker and grille to the rear tray. Match the 4 screw holes in the speaker frame and the grille to the holes in the rear tray, insert the 4 screws in into the holes and secure them with 4 nut. 7. The process for installing the speakers in the door is much the same as for installing the speakers in the rear tray. ln this case, however, extra care must be taken to install the speaker out of the way of the door handle. lnstall the speakers with the terminals down.

Tweeter Mounting
Swivel Mounting Flush Mounting Angle Mounting Surface Mounting

14

14

3
13

x2

3

x2

4

4

Woofer Mounting

12

5

1

x4

10

Network Mounting

2

x2

5 6
x2

6

x2

Amplifier

2-WAY CR OSSOVE 12dB/Oct.R NETWOR K

6
Tweeter level adjust
2-WAY CR OSSO VE 12dB/Oct.R NETWOR K

x4

INPUT

WOOFER

TWEETE R

INPUT

R

(-3dB) -3dB 0dB (-0dB) -3dB 0dB
INPUT

Tweeter

WOOFER

TWEETE

-3dB 0dB

Midwoofer

2-WAY CR

OSSO 12dB VER NETW /Oct. ORK

WOOFER

TWEE TER

1 1

6

x2

Connection

Parts

7

1 1

1 Screw

2 Screw

3 Screw

4 Screw

5 Screw nut

6 Speed nut

x8

x4 (O4x20mm) (O3.5x20mm)

x4 (O4x25mm)

x2 (O4mm)

x4 (O4 mm)

x16

Amplifier Black lined
2-WAY CROSSOVER NETWORK 12dB/Oct.

(O4x25mm)

7 Network cord 8
x2

8 Speaker cord

9 Speaker cord

x2 2m 2m

x2

INPUT

WOOFER

TWEETER
4m

Woofer

Black lined

10 Grille Ass'y

1 Network 1

12 Mounting bracket

13 Angle adaptor

14 Fix frame

2-WAY CR

OSSO VE 12dB/O R NETW ct. ORK

x2
INPUT WOOFER TWEE TER

x2

x2

9
Tweeter

x2