PHILIPS CT0580BLK/00
Instrukcja Obsługi

Charge the battery
Your phone is powered by a rechargeable battery. A new battery is partially charged and an alarm will warn you when the battery level is low. If the battery is empty, it needs to be charged for 2 or 3 minutes before the battery symbol indicators flash. Plug the charger into the charger connector at the bottom of the phone and ensure that the arrow symbol on the charger is facing upwards as shown below. Then plug the other end of the charger into an AC power socket. The battery symbol indicates the state of charge. The charge indicators will scroll when the battery is charging. The battery is fully charged when the charge indicators stop scrolling. You can then disconnect the charger.

Keeping the charger plugged to the mobile phone when the battery is fully charged will not damage the battery. The only way to disconnect the charger is to unplug it, so use an easily accessible AC power socket. If you are not using your phone for a period of time, we recommend that you remove the battery. You can use your phone while it is charging. When the battery is completely discharged, the charge indicators will appear only after a few minutes of charging.

6

Getting Started