Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 17 (kliknij aby zobaczyć)
CW-XC100VK / CW-XC120VK
10.3.10. Setting The On Timer
Touch Control Panel Remote Control Display Press the TIMER button. � The TIMER indicator light will blink awaiting for setting.
Press the TEMP/TIMER �Upward� or �Downward� button until the preferred hour of operation is reached.
Press the SET/CANCEL button to complete the setting. At this time, the TIMER indicator light is steady instead of blinking. NOTE The display will show the remaining hour to the start of the operation (if you set to turn on 3 hours from now, the timer will show �2� at an hour later). When set time is reached, the air conditioner starts the operation under the previous setting mode and the TIMER indicator will light off. Now, the previous set mode and the fan speed will light up. Simultaneously, the display will show the setting temperature.
10.3.11. Check Temperature / Mode / Fan Speed Setting During On Timer
Touch Control Panel Remote Control Display Press the TIMER button. The TIMER indicator light will blink and the previous temperature setting will be shown. Simultaneously, MODE and FAN SPEED indicator will light up. This indication will last for 5 seconds, and then the display will show the remaining time. MODE and FAN SPEED indicator light will turn off. At this time, the TIMER indicator light is steady instead of blinking.
10.3.12. Change Temperature/Mode/Fan Speed Setting During On Timer
Touch Control Panel Remote Control Display Press the SET/CANCEL button to cancel the timer setting.
Press the OPERATION. Set the desired mode and the fan speed. Then press OPERATION button to stop operation.
Start the TIMER setting again by repeating the step from the �Setting The On Timer� procedures.
10.3.13. Cancel Timer Setting During On Timer
Touch Control Panel Remote Control Display Press the SET/CANCEL button to cancel the timer setting. The SET/CANCEL indicator light will turn off. To operate the air conditioner before reaching the set timer: � Press the SET/CANCEL to cancel the timer. � Press the OPERATION button to turn on the unit.
