Subwoofer On or Off mode
If you connect a subwoofer to this unit, change the Subwoofer mode to "S-W ON". Low-frequency effect signals are sent to the subwoofer. In "S-W OFF", low-frequency effect signals are directed to the other speakers.
Adjustments
Speaker level adjustment
The unit is equipped with a built-in test signal generator for easy balance adjustment of the channels. The test signal "travels" from channel to channel. Adjust the sound level for the same apparent loudness from each channel at listening position. The left and right front speakers create the stereo effect. The center speaker helps achieve precise sound positioning over a broad sound field. The surround speakers enhance the "depth" of the sound field.
1 Press NORMAL, PHANTOM or 3 STEREO to select the mode for the speaker configuration (see "Dolby Surround modes").
On the remote control, press SURROUND repeatedly. - For playback with the supplied speakers, select "NORMAL".
En
1 Play the Dolby Surround sound. 2 Press MANUAL SELECT on the remote control.
"S-W OFF" or "S-W ON" is displayed.
�The channel will not change while you are adjusting the sound level. �Speaker level adjustment is available only for speakers that are activated. �Adjustment of speaker levels is common to Dolby Digital and Dolby Pro Logic. �A clicking sound might be heard with the test signal during level adjustment. This is due to the circuit characteristics and is not a malfunction. To stop speaker level adjustment Press s. To adjust the speaker level without the test signal 1 Play the Dolby Surround sound. 2 Press NORMAL, PHANTOM or 3 STEREO to select the mode for the speaker configuration. On the remote control, press SURROUND repeatedly. 3 Press MANUAL SELECT repeatedly on the remote control until "L/R" is displayed. 4 Press f or g to adjust the sound level of the front speakers. 5 Repeat steps 3 and 4 to adjust the sound level of the other speakers. To adjust the center speaker level directly on the remote control 1 Play the Dolby Surround sound. 2 Press SURROUND repeatedly to select "NORMAL" or "3 STEREO". 3 Press CENTER LEVEL + or -. To adjust the rear (surround) speaker level directly on the remote control 1 Play the Dolby Surround sound. 2 Press SURROUND repeatedly to select "NORMAL" or "PHANTOM". 3 Press REAR LEVEL + or -.
3 Press f to display "S-W OFF" or g to display "S-W ON" to select the desired mode.
�Subwoofer mode setting is common to Dolby Digital and Dolby Pro Logic.
2 Hold down MANUAL SELECT on the remote control until "L" flashes in the display.
The indication for the currently adjustable channel flashes in the display and the test signal automatically cycles through the following channels: - L: The left front speaker - C: The center speaker - R: The right front speaker - RS: The right surround speaker - LS: The left surround speaker
3 Press f or g on the remote control to adjust the sound level.
- For the left and right front speakers: Press f to shift the balance to the left and g to shift to the right. - For the center and the surround speakers: Press f to de-emphasize the channel and g to emphasize the channel.
