To turn the power on Press one of the function buttons (TAPE, TUNER, VIDEO/AUX, CD, MD). Playback of the inserted disc begins, or the previously tuned station is received (Direct Play Function). POWER is also available. When the unit is turned on, the disc compartment may open and close to reset the unit. To turn the power off Press POWER. Illumination guides Whenever one of the function buttons is pressed, the buttons for that operation light up or flash. Flash windows The windows of the CD compartment and the cassette decks light up or flash while the unit is being powered on. To turn off the light of the CD window, press To turn off the light of the cassette decks, press � Do not perform this operation furring recording. while pressing CD. To turn back on, repeat the above. while pressing TAPE.. To turn back on, repeat the above.
To change the brightness level of the display 1 Press ECO so that "ECO MODE" is displayed. 2 Within 4 seconds, turn MULTI JOG to display "DIM MODE", and then press ENTER within 4 seconds. 3 Within 4 seconds, turn MOULTING to select the dimmer mode as below The mode will be automatically set after 4 seconds. It will also be set if ENTER is pressed within 4 seconds after step 3..
DIM-OFF: The normal display. DIMMER 1: The illumination of the display is dimmer than usual. DIMMER 2: The illumination of the display is dimmer than DIMMER 1. DIMMER 3: The illumination of the display is dimmer than DIMMER 2. The spectrum analyzer, the window of the CD compartment and the buttons lamps light off. If the timer recording (page 26) is done with the economizing mode (page 6) set to "ON" and the power turns off, the dimmer mode will be set to "DIMMER" the next time power is turned on.
