Caring For Your Dehumidifier Continued
Top flange A screws
l
Remove the top flange screws.
For models D-30, D-40 and D-50: Remove the rear grille. Pull out at bottom and drop grille down. l Lift cabinet from base. 3. Coils should be inspected annually. Brush clean, if necessary, with warm water and mild detergent. Rinse and dry thoroughly. Be sure power supply cord is disconnected receptacle. from
l
4. The compressor
is sealed and needs no oiling.
The fan motor is prelubricated and does not require further oiling under normal operating conditions. However, if the
dehumidifier is operated under severe environmental conditions (dust, dirt, high temperatures) the fan motor should be oiled annually. Follow the instructions in step 5.
