SONY D825TM
Instrukcja Serwisowa

Customizing Your Monitor

Getting StartedYour Monitor Customizing

4 Using the ZOOM OSD
You can enlarge or reduce the picture size using the ZOOM OSD. This setting is stored in memory for the current input signal. 1 2 3 4 Press the MENU button to display the MENU OSD. Highlight the ZOOM OSD using the BRIGHTNESS and CONTRAST buttons and press the MENU button again. Press the > (CONTRAST) ?// buttons to enlarge or reduce the picture size. Press the MENU button once to return to the MENU OSD, or press it twice to return to normal viewing.

6 Using the SIZE OSD
You can adjust the picture size using the SIZE OSD. This setting is stored in memory for the current input signal. 1 Press the MENU button to display the MENU OSD. 2 Highlight the SIZE OSD using the BRIGHTNESS and CONTRAST buttons and press the MENU button again. 3 To adjust the vertical size press the ¨ (BRIGHTNESS) ./> buttons. 4 To adjust the horizontal size press the > (CONTRAST) ?// buttons. 5 Press the MENU button once to return to the MENU OSD, or press it twice to return to normal viewing.

8 Using the GEOMETRY OSD
You can adjust the picture�s geometry using the GEOMETRY OSD. This setting is stored in memory for the current input signal. 1 Press the MENU button to display the MENU OSD. 2 Highlight the GEOMETRY OSD using the BRIGHTNESS and CONTRAST buttons and press the MENU button again. 3 Press the ¨ (BRIGHTNESS) ./> buttons to select the desired geometry adjustment. 4 Press the > (CONTRAST) ?// buttons to adjust the geometry. 5 Press the MENU button once to return to the MENU OSD, or press it twice to return to normal viewing.

Resetting the Adjustments
Resetting a specific adjustment:
1 Press the MENU button to display the MENU OSD 2 Highlight the OSD containing the adjustment you want to reset using the BRIGHTNESS and CONTRAST buttons and press the MENU button again. 3 Press the ¨ (BRIGHTNESS) ./> buttons to select the adjustment you want to reset. 4 Press the adjustment. (RESET) button to reset this specific

Note You can enlarge or reduce the picture size until either the horizontal or vertical size reaches its maximum or minimum value.

5 Using the OPTION OSD
You can manually degauss (demagnetize) the CRT, move the OSD position and lock the user controls using the OPTION OSD. 1 2 Press the MENU button to display the MENU OSD. Highlight the OPTION OSD using the BRIGHTNESS and CONTRAST buttons and press the MENU button again. Press the ¨ (BRIGHTNESS) ./> buttons to select the desired adjustment item. Press the > (CONTRAST) ?// buttons to activate the manual degauss, move the OSD position or lock the user controls. 5 Press the MENU button once to return to the MENU OSD, or press it twice to return to normal viewing.

7 Using the LANGUAGE OSD
You can set the OSD language to English, German, French, Spanish or Japanese using the LANGUAGE OSD. To reset to English, press the RESET button while the LANGUAGE OSD is displayed. 1 Press the MENU button to display the MENU OSD. 2 Highlight the LANGUAGE OSD using the BRIGHTNESS and CONTRAST buttons and press the MENU button again. 3 Press the ¨ (BRIGHTNESS) ./> buttons to select the desired language. 4 Press the MENU button once to return to the MENU OSD, or press it twice to return to normal viewing.

Resetting all of the adjustments for the current input signal
Select
ROTATION PINCUSHION PIN BALANCE KEYSTONE KEY BALANCE

To
adjust the picture rotation adjust the picture sides adjust the picture side balance adjust the trapezoidal distortion adjust the picture shape balance

While there is no OSD displayed, press the (RESET) button. All of the adjustments for the current input signal are reset to the factory settings. Adjustments not affected by changes in the input signal (such as OSD language, OSD position and the Control Lock function) are not reset to the factory settings.

7 �

3 4

Resetting all of the adjustments for all input signals
Press and hold the (RESET) button for more than two seconds. All of the adjustments, including the brightness and contrast, are reset to the factory settings.

Degauss: If a second degauss cycle is needed, allow a minimum interval of 20 minutes for the best result. OSD Position Change: To change the OSD position, press the ¨ (BRIGHTNESS) ./> buttons to select the direction (horizontal or vertical), then press the > (CONTRAST) ?// buttons to move the OSD in the selected direction. User Control Lock: Once you select �ON� to lock the user controls, you cannot select any item except �EXIT� and �OPTION� in the MENU OSD. If you try to access any other OSD, the H mark appears on the screen. To cancel the Control Lock: Repeat the above procedure and set Control Lock to �OFF.�

D825TM

8

9