Manual Channel Preset
Manual channel preset enables you to manually tune in a channel. 1) Press 2) Press , then . or to select �INITIAL� , . to select �CH TUNING�, . to select �MANUAL� ,
MENU TIMER SET UP INITIAL
Loading and Playing a DVD
STANDBY-ON SPEED/ SYSTEM
T-SET OPEN/CLOSE
1 4
CLEAR C.RESET
2 5 8 0
3
CHANNEL
6 9 +10
DVD MODE
then press 3) Press or then press 4) Press or
INITIAL CH TUNING CLOCK
7
DISPLAY
VCR
1) Turn on the TV, amplifier and any other components connected to the unit. 2) Set the TV and audio receiver (commercially available) to the correct channel. 3) Press and confirm that the DVD OUTPUT indicator is lit. to switch to DVD mode. If not, press
PLAY STOP
REC/OTR SKIP PAUSE
then press . 5) Press or to select �POSITION�, then press . When a weak signal is received in Manual Tuning mode, you can change the background to solid blue or the static screen by pressing . or
CH TUNING AUTO MANUAL MOVE
TOP MENU
SEARCH ENTER
AUDIO
4) Press
to open the disc loading tray and place the disc on
MENU
the tray, with the label side up.
RETURN A-B
SETUP
ZOOM
SUBTITLE
ANGLE
REPEAT
MANUAL POSITION CHANNEL DECODER SKIP P08 008 [OFF] [OFF]
5) Press . The tray will close automatically and playback will start. � For DVDs with a title menu recorded, the screen will display the title. 6) Press to stop playback. Note: � A �prohibited icon� may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by this unit or the disc.
6) Press the Number buttons,
to select a position number from 01-99, then press . 7) Press or to select �CHANNEL�, then press . 8) Press or to start scanning. The unit's tuner will begin to search up or down automatically. When a channel is found, the unit will stop searching and the picture will appear on the TV Screen. You can select desired channel number by using the Number buttons. You must refer to the Channel Plan table and press three digits to select the channel number. (To select channel 24, press 9) Press to exit.
Channel Plan
CH Indication 01 � 10 21 � 69 74 � 78 80 � 99, 100 121 � 141 TV Channel IRA � IRJ, GAP E21 � E69 X, Y, Z, Z+1, Z+2 S1 � S20, GAP S21 � S41
0
button first and then press
2
and
4
.)
STANDBY-ON SPEED/ SYSTEM
T-SET OPEN/CLOSE
To Select a Channel
You can select a channel using CHANNEL ( / ) or directly pressing the Number buttons on the remote control.
