Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 5 (kliknij aby zobaczyć)
� Connections and VCR channel Setting �
4
Set VCR channel
Initial Settings
Language Setting
The default setting is �ENGLISH�.
To view playback of a recorded tape, or to watch a program selected by the VCR's channel selector, the TV must be set to channel 3 or 4 (video channel) when a TV is connected with the 75 ohm coaxial cable only.
1 Set the 3/4 Channel selector switch (Rear of the VCR) to
1
Access Menu screen
CH 3 or 4.
2
Press MENU on the Remote. Press SET �/+ to select �LANGUAGE�, then press ENTER. Select language This VCR offers you the language choice to view menus and some messages � in English, Spanish or French. Press SET �/+ to select your desired language, then press ENTER.
Turn ON the TV and set to CH 3 or 4 to correspond with the channel selected in 1. Press POWER to turn on the VCR. The POWER indicator will light. Press TV/VCR to select the VCR position. The TV/VCR indicator will light. Select any channel to receive a TV station in your area. The channel number will appear on the screen for about 4 seconds.
Clock Setting Preparations
You must set the date and time for timer recording. Access Menu screen Press MENU on the Remote. Press SET �/+ to select �CLOCK SET�, then press ENTER.
To make corrections any time during the process Press CANCEL repeatedly until the item you want to change blinks, then press SET �/+. NOTE: After a power failure or disconnection of the power, the timer settings will be lost. In this case, reset the present time.
