E8BK1BD(EN).fm Page 20 Tuesday, April 4, 2006 6:29 PM
Track Search
CD MP3 JPEG
Using the Number buttons
There are three ways to begin the playback of a specific track on a disc.
Using the Number buttons
1) Press the Number buttons to enter the desired track number. �Playback will start at the selected track. �For any discs, to play a single-digit track, press the number directly (e.g. for track 3, press 3). �For the disc with less than 100 tracks, to play a doubledigit track, press +10, then the number (e.g. for track 26, press +10, 2, 6). �For the disc with more than 100 tracks, to play a doubledigit track, press +10, 0, then the number of the track. (e.g. for track 26, press +10, 0, 2, 6). To play a tripledigit track, press +10, then the number of the track (e.g. for track 126, press +10, 1, 2, 6).
Using SEARCH MODE
1) During playback, press the Number buttons to enter the desired chapter number. �Playback will start at the selected chapter. �For single digit chapters (1-9), press a single number (e.g. to play chapter 3, press 3). �To play chapter 26, press +10, 2, 6. Note: � Depending on the disc being played, using the Number buttons cannot be performed.
Using SKIP H G
During playback, press SKIP G to go to the next chapter. Press it repeatedly to skip subsequent chapters. Press SKIP H to go back to the beginning of the current chapter. Press it repeatedly to go back to the previous chapter. Time Search
DVD-V CD
1) During playback, press SEARCH MODE repeatedly until the Time Search screen appears on the TV screen.
TOTAL 1:29:00
1) Press SEARCH MODE. �The Track Search display appears. 2) Within 30 seconds, select a desired track number using
the Number buttons.
�Playback will start at the selected track. �For the disc with more than 10 but less than 100 tracks, to play a single-digit track, press 0 first, then the number of the track (e.g. for track 3, press 0, 3). �For the disc with more than 100 tracks, to play a single or a double-digit track, press 0 first, then the number of the track (e.g. for track 3, press 0, 0, 3 and for track 26, press 0, 2, 6). �In any other cases, just press the number of the track.
Using SKIP H G
2) Within 30 seconds, enter a desired disc time using
the Number buttons.
�Playback will start at the specified time. �For DVDs, enter a desired time of the current title. �For Audio CDs, enter a desired time of the current track. �Press CLEAR to erase the incorrect input.
Note: �
During playback, press SKIP G to move to the next track. Press it repeatedly to skip subsequent tracks. Press SKIP H to go back to the beginning of the current track. Press it repeatedly to go back to the previous tracks. �If SKIP H G are pressed while the playback is paused, the playback will be paused again after skipping to the next track. �During Dual Playback, using SKIP H G will only affect MP3 tracks. �To skip JPEG files, use s or B. If the �SLIDE SHOW� is set to �MUSIC�, SKIP H G are available for both MP3 and JPEG files. Note: � SKIP H G are not available when playback is stopped. Chapter / Title Search
DVD-V Using SEARCH MODE
�0� appears automatically when there is no need to enter a number. For example, �0:0_:_ _� appears in the Time Search display if the total time of the disc or track is less than 10 minutes. � Time Search is not available on some discs.
DVD-V CD
Marker Setup Use markers to memorise your favourite places on a disc. 1) During playback, press SEARCH MODE repeatedly until the Marker Setup screen appears on the TV screen.
1) During playback, press SEARCH MODE once for the Chapter Search, twice for the Title Search.
/29
2) Press s or B to select 1, 2, 3, 4, 5, 6, 7, 8, 9 or 10 and ensure that �_ _ _ _:_ _:_ _� appears in the display. 3) When the disc reaches the desired point, press ENTER. �The Title or Track and elapsed time will appear on the TV screen. 4) To return to the marker later, press SEARCH MODE repeatedly until the Marker Setup screen appears and s or B to choose the desired marker, then press ENTER. 5) Press SEARCH MODE or RETURN to exit.
Note: �
2) Enter the desired chapter/title number using the Number
buttons.
Opening the disc tray, turning off the power or selecting �AC� at step 2) and press ENTER will erase all markers. � To clear a marker, use s or B and select the marker number to be cleared, and then press CLEAR. � You can mark up to 10 points.
20
EN
