Tekstowy podgląd strony 126 (kliknij aby zobaczyć)
Superimposing a still image in a �Memory Stick� on an image � MEMORY MIX Recording a superimposed image to tape
Before operation �Insert a tape for recording into your camcorder. �Insert a �Memory Stick� recorded with still images into your camcorder. (1) Set the POWER switch to CAMERA. (2) In the standby mode, press FN and select PAGE2. (3) Press MEM MIX. The last image recorded on the �Memory Stick� appears on the right lower part of the LCD screen. (4) Press �/+ on the right lower corner of the LCD screen to select the still image which you want to superimpose. � : to see the previous image + : to see the next image (5) Press a desired mode. The still image is superimposed on the moving picture. (6) Press �/+ on the left lower corner of the LCD screen to adjust the effect, then press OK to return to PAGE2. M. CHROM � The color (blue) scheme of the area in the still image which is to be swapped with a moving image M. LUMI � The color (bright) scheme of the area in the still image which is to be swapped with a moving image C. CHROM � The color (blue) scheme of the area in the moving image which is to be swapped with a still image M. OVERLAP � No adjustment necessary The fewer bars there are on the LCD screen, the stronger the effect. (7) Press EXIT to return to FN. (8) Press START/STOP to start recording.
