|
Dla tego produktu nie napisano jeszcze recenzji!
Superimposing a still image in a �Memory Stick� on a moving picture � MEMORY MIX
Before operation �Insert the tape you want to use for recording into your camcorder. �Insert the �Memory Stick� with still images recorded into your camcorder.
(1) Set the POWER switch to CAMERA. (2) In standby mode, select FN, then press the center z on the control button. The PAGE1 screen appears. (3) Select MEM MIX, then press the center z on the control button. The last recorded or last composed image appears on the lower part of the screen as a thumbnail image. (4) Select �/+ on the lower-right corner of the screen, then press the center z on the control button to select the still image which you want to superimpose. � : to see the previous image +: to see the next image (5) Select the desired mode, then press the center z on the control button. The still image is superimposed on the moving picture. (6) Select �/+ on the lower-left corner of the screen, then press the center z on the control button to adjust the effect. (7) Select OK, then press the center z on the control button. The PAGE1 screen appears. (8) Select EXIT, then press the center z on the control button. The FN screen appears. (9) Press START/STOP to start recording.
�Memory Stick� Operations
9 1
MEMORY/ NETWORK
POWER
CAMERA
(CHG) OFF ON
VCR
MODE
3
MEM MIX
MEM MIX
OFF MCCAM OVER� LUMI LAP
OK
CAMCM MCCAM CHROM CHROM
Still image
�
100�0001
+
2
FN
4,5
� +
MEM MIX
OFF
OK
M. LUMI
�
+
100�0001 � +
6
� +
MEM MIX
OFF
OK
M. LUMI
�
+
�
100�0001
+
133
|
