b Note � You can play back a dual sound track cassette on this camcorder. However, you cannot record a dual sound track on this camcorder. � The setting returns to [STEREO] when you disconnect the power source from your camcorder for more than 5 minutes.
AUDIO MIX
You can adjust the audio balance between the originally recorded sound (ST1) and sound added afterwards (ST2) on the tape (p. 107).
b Note � You cannot adjust sound recorded in 16 bit audio mode. � Only the originally recorded sound will be heard when you disconnect the power source from your camcorder for more than 5 minutes.
LCD/VF SET
The recorded picture will not be affected by this setting.
Using the Menu
LCD BRIGHT
See page 20 for details.
LCD BL LEVEL
You can adjust the brightness of the LCD screen�s backlight.
GNORMAL BRIGHT Standard brightness. Select to brighten the LCD screen.
b Note � When you connect your camcorder to the wall outlet, [BRIGHT] is automatically selected for the setting. � When you select [BRIGHT], battery life is reduced by about 10 percent during recording.
LCD COLOR
Touch / to adjust the color on the LCD screen.
Low intensity
High intensity
VF B.LIGHT
You can adjust the brightness of the viewfinder.
GNORMAL BRIGHT Standard brightness. To brighten the viewfinder screen.
