SONY DCRTRV890E
Instrukcja Serwisowa

Recording from a VCR or TV
You can record a tape from another VCR or a TV program from a TV that has audio/video outputs. Connect the camcorder to the VCR or TV.

(1) Set the POWER switch to VTR and set DISPLAY to LCD in the menu system. (2) Press r REC and the button on the right together at the point where you want to start recording.
In recording and the recording pause mode, S VIDEO and AUDIO/VIDEO jacks automatically work as input jacks. If your VCR or TV has an S video jack, connect using the S video cable (not supplied) [a] to obtain a high quality picture.

1

2

REC

POWER MEMORY

(not supplied) OUT S VIDEO VIDEO AUDIO AUDIO/VIDEO OUT If your TV or VCR is a monaural type, connect the yellow plug of the A/V connecting cable for video to the TV or VCR. Connect only the white or red plug for audio to the TV or VCR. If you connect the white plug, the sound is L (left) signal. If you connect the red plug, the sound is R (right) signal. If you are going to connect the camcorder using the S video cable (not supplied) [a], you do not need to connect the yellow (video) plug of the A/V connecting cable [b] . Notes � If the S video plug is not provided on your TV or VCR, do not connect the S video cable (not supplied) to the camcorder. Pictures will not appear. � The dual sound cannot be recorded in this camcorder. � If you fast-forward or slow-playback on the other equipment, the image being recorded may turn black and white. When recording from other equipment, be sure to play back the original tape at normal speed. S VIDEO OUT S VIDEO [a]

VTR OFF CAMERA

[b] AUDIO/VIDEO

To stop recording
Press �.

86