Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 7 (kliknij aby zobaczyć)
9. EXCHANGING THE PICK-UP SYSTEM
Loosen the tightening screws on the headshell and remove the connection-cables of the pick-up system. Remove the old pick-up system from the Headshell. Read the user manual of the new pick-up system. Put the stylus cover on the stylus. Connect the Headshell's connection cables with the terminals of the pickup-system and make sure that the occupation of the cables is correct. The different colours mean: Used colour: White (L+) Blue (L-) Red (R+) Green (L-) Channel and poles: Left, plus-pole Left, minus-pole Right, plus-pole Right, minus-pole
Tighten the screws on the Headshell.
Adjusting the overhang:
The overhang is the distance between the stylus and the center of the turntable. For optimized pick-up, the overhang should be set to 20 mm. Loosen the tightening screws on the headshell and move the system forwards or backwards until you reach the desired position. Make sure that you tighten the screws before you operate the device again.
10. CLEANING AND MAINTENANCE
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
We recommend a frequent cleaning of the device. Please use a soft lint-free cloth moistened with any good glass cleaning fluid. Never use alcohol or solvents! There are no servicable parts inside the device. Maintenance and service operations are only to be carried out by authorized dealers.
