PIONEER DEH-12/XIN/UC
Instrukcja Serwisowa

DEH-1300,12

7.1.2 DISASSEMBLY
- Removing the Case Unit (not shown)
1. Remove the Case Unit.

- Removing the CD Mechanism Module (Fig.1)
Remove the four screws. Disconnect the connector and then remove the CD Mechanism Module (not shown).

- Removing the Grille Assy (not shown)
1. Disconnect the two stoppers and then remove the Grille Assy.

CD Mechanism Module

Fig.1

Cover

- Removing the Tuner Amp Unit
Remove the three screws and then remove the Cover. (Fig.2) Remove the two screws. (Fig.2)

Remove the screw. (Fig.3)

Fig.2

Straight the tabs at fore locations indicated and then remove the Tuner Amp Unit. (Fig.3)

Fig.3 Tuner Amp Unit

43