PIONEER DEH-3190UB/XN/ID
Instrukcja Obsługi

Section

Installation
DIN Rear-mount
1 Extend top and bottom of the trim ring outwards to remove the trim ring. (When reattaching the trim ring, point the side with a groove downwards and attach it.)

04

Installation

Trim ring

! It becomes easy to remove the trim ring if the front panel is released.

2 Determine the appropriate position where the holes on the bracket and the side of the unit match.

3

Tighten two screws on each side.

Screw

Mounting bracket

Dashboard or console

! Use either truss screws (5 mm � 8 mm) or flush surface screws (5 mm � 9 mm), depending on the shape of screw holes in the bracket.

En

21